The PRO series TB-1200 combines 1,200 watts of earth-shaking power with total tonal finesse and versatility to produce thick, natural and balanced bass tone that sits perfectly in the mix onstage and in the studio. Based on the acclaimed TBP-1 tube bass preamp, the key to its sound is the passive tone stack - the backbone of classic Fender guitar and bass amps - in which each control knob setting affects the sound of the other controls, producing big, warm notes.
The overdrive section (gain, volume, blend) sits on top of the clean channel, letting you dial in tones from subtle grind to full-on overdrive. Vari-Qtm is a smart semi-parametric EQ with a user-selectable frequency and 15 dB cut/boost. When boosting frequencies, it automatically widens the focus of the Q for a broader, more musical boost. When cutting frequencies, it automatically narrows the focus of the Q for a well-defined cut (notch).
Room Balance is a global EQ shift for cabinets/stage response. A clockwise turn cuts low-end frequencies while raising upper frequencies. A counter-clockwise turn boosts low-end frequencies while cutting upper frequencies. This knob does not affect the XLR out, so you can dial in your stage sound while giving the soundman an unaltered signal. Four-button TBFS-4 footswitch included.
Specs
Model Name: TB-1200 Head
Series: Pro Series Bass Amps
Amplifier Type: Hybrid Tube/Solid State Amplifier
Color/MSRP/Part # : Brushed Aluminum/$1,799.99/ 224-5700-000
Electronics
Voltage: 120V
Wattage: 1200 Watts Mono
Effects Loop: Effects Loop With Send & Return
Inputs: 6dB Input Pad
Auxiliary Input: 1/4" Footswitch Jack
Headphone Jack: Tuner Output Jack
Line Out: XLR Output with Level, Ground Lift and Pre-Post EQ Switch
Extension Speaker Jack: Speakon® and 1/4" jacks
Channels: One Channel
Power Handling: 1200 Watts @ 2 Ohms, 800 Watts @ 4 Ohms, 550 Watts @ 8 Ohms
Controls: Vintage Tube: Volume, Bass w/Deep Switch, Mid, Treble w/Bright Switch. Tube Overdrive: Gain, Volume, Blend. Vari-Q: Frequency, Level/Q. Room Balance, Master Volume
Hardware
Handle: Chrome Handle
Front Panel: Brushed Aluminum Control Panel
Input Impedance: 820k (Front Panel Input); 10k (Rear Panel Input)
Sensitivity: 1V RMS (0dBV)
Amplifier Length: 15" (38.1 cm)
Amplifier Width: 19" (48.26 cm)
Amplifier Height: 3.5" (8.8 cm)
Amplifier Weight: 34 lbs. (12.7 kg)
Tubes
Preamp Tubes: 2 x 12AX7
Miscellaneous
Unique Features: Fender® passive tone stack that delivers creamy tube tone, Tube Overdrive, Vari-Q™ section, and Room Balance controls, Mute Button
Accessories
Footswitch: Includes 4-Button Footswitch w/ Built-In Tuner
Knobs: Black Aluminum Knobs
Accessories: Includes TBFS-4, 4-Button Footswitch with Built-in Tuner
Pairing this big boy with a cab that can handle the power probably means you're going to need something like the 810 Pro!
The 810 PRO is the biggest cabinet a bass player can take into battle. Features include four chambered and ported sections that each contain two 10” Fender® Special Design Eminence® cast-frame drivers that deliver a pulverizing punch across the largest stages. High-frequency compression driver horn can be adjusted with the attenuator on the back. Handle and wheel placement and rear slide rails make maneuvering and vehicle loading easier. Rated at 2,000 watts program (1,000 watts continuous).
Model Name: 810 PRO Cabinet
Series: Pro Series Bass Amps
Amplifier Type: Speaker Enclosure
Color/MSRP/Part # : Black/$1,799.99/221-7200-010
Electronics
Inputs: Speakon® and 1/4" jacks
Power Handling: 2000 Watts (Program), 1000 Watts (Continuous) Handling Capability
Horn/Tweeter: 1- Foster® Compression Driver Horn
Controls: High Frequency Horn Attenuation
Hardware
Cabinet Material: 3/4" 7-Ply Birch/Maple Plywood w/ Black Textured Vinyl Covering
Handle: Corner Mounted Recessed Handles
Cover/Grill Cloth: Black Metal Grille
Sensitivity: 103 dB, 1w-1m
Amplifier Length: 16" (40.6 cm)
Amplifier Width: 26" (66 cm)
Amplifier Height: 48" (121.9 cm)
Amplifier Weight: 160 lbs (72.5 kg)
Speakers
Speaker: 8-10" Fender® Special Design Cast Frame Eminence® 8 Ohm, 125 Watt Speakers, (p/n 0057982000).
Speaker Impedance: 4 Ohms
Miscellaneous
Unique Features: Heavy Duty Dual, Parallel Wired 1/4" Jacks, Speakon Inputs, Attenuator on Horn, Perforated Metal Speaker Grille, Heavy Duty Skid Rails on Rear of Cabinet, Diamond Plated Rear Kick Plate, Recessed Rear Casters, Corner Mounted Recessed Handles for Easy Moving, 3/4" 7-Ply Birch/Maple Plywood Construction
Accessories
Casters: Recessed Rear Casters
Cover: Optional Amp Cover Available
The perfect couple!
Check out the Fender Website for more info on their bass heads and cabs.
vBulletin Message